Nokia n1 was launched in 2014. It was Nokia’s first product to enter the tablet market, and Nokia put most of its efforts into it. So, what kind of performance does this tablet have? Today, the editor will give you a detailed introduction to this tablet from the perspective of disassembly, and then answer some common questions about the use of this tablet.

Nokia n1 disassembly

The front of Nokia n1 uses a piece of tempered glass, and its body is made of high-quality aluminum. It is pressed in one piece, so if you want to successfully disassemble it, you need to start with the screen, which is the most fragile part of the tablet. Since the screen is connected to the body with strong glue, you should first use a heat gun to heat the screen and use a suction cup tool to pull up the screen. After opening the gap in the screen, we need to use five pieces of warping pieces to expand the gap in the screen and separate it from the body. After removing the screen, we need to separate the connecting parts of the motherboard, and then separate the camera, speakers, WIFI antenna and other components. After removing the above components, we can unscrew a few screws that fix the motherboard, pull out the glue that fixes the host, and then we can easily remove the motherboard.

Through this disassembly, we also discovered that the design of Nokia n1 has the following advantages:

1. The back shell of Nokia n1 uses CNC technology. At the same time, the back shell is reinforced at the corners and uses a screw + adhesive connection method to make the body stronger and anti-fall.

2. The connection between the tablet's screen and the body is tighter and more solid. If it is not heated in advance, it will be difficult to turn on the screen smoothly.

3. In terms of the headphone jack and body buttons, the tablet uses solid and high-quality materials, which ensures the service life of each component. In addition, the tablet’s audioThe volume keys adopt a balance bar design, which has better key feedback.

4. The antenna of this tablet adopts an up-and-down layout, which makes the signal reception more high-quality and stable.

Can nokian1 install the system by itself?

Nokia n1 can install a system suitable for this model, and the system needs to be based on Android platform, other systems cannot.

Where is the USB debugging of nokian1?

To turn on the USB debugging of nokian1, we need to click "Settings" - "About Tablet" once, and then continuously click on the version number. Click five times. After activating the developer mode in this way, return to the settings interface and you will see the "USB debugging" function. If you need to enable this function, you only need to check the check box in front of the function.

What should I do if my nokian1 charges slowly?

Slow charging speed is usually caused by the charger. It is recommended that you use the original charger or the charger of IPAD AIR.

The above are the disassembly details and common questions of Nokia nokian1. I hope that the editor's introduction can provide some help to everyone.