How to flash BIOS in Windows on Acer laptop

Posted on

There are certain risks in refreshing the BIOS, please operate with caution. At the same time, there are certain differences in operation depending on the product model, so you need to be very careful.

Acer 4560G-6344G64Mnkk

Step 1: Log in to WWW.ACER.COM.CN and select "Service Support".

Step 2: Select "Download Center".

Step 4: Select the computer model and click BIOS (here, we take AS4740G as an example) (if you are instructing users or other personnel to refresh, please prompt multiple times, red font content).

Step 5: Right-click on the downward arrow, select Save Target As, and save to your computer’s hard drive. Wait for the download to complete.

Step 6: Find the downloaded file, right-click to decompress it, and decompress it to a convenient place such as (D:\BIOS folder (create your own folder)).

Step 7: Find the decompressed file, which contains the DOS folder and windows folder and instructions for use. Here we take the windows refresh method as an example. You can double-click the readme to view the refresh method. .

Step 8: Enter the windows folder, double-click with the left mouse button to run Insyde_Winflash.exe.

Step 9: Click "Start" to proceed to the next step.

Step 10: After clicking start, you will be prompted not to disconnect the power adapter.

Step 11: The program starts to run automatically and decompress.

Step 12: After decompression, run the refresh software "InsydeFash" (automatically run). If the computer is not connected to the power adapter, a prompt box will appear asking to connect the power adapter and try again.

Step 13: Finally, "Are you sure you want to flash Bios" will be prompted again. Click "OK" to start the refresh, and the keyboard and touchpad (including external mouse) will be locked. The refresh time is approximately It lasts for 30 seconds to 1 minute, and the computer speed will slow down. (I cannot take screenshots due to the lock, but the follow-up is fully automatic and will automatically take place after the refresh.Automatically restart and enter the system).

Note: If there is a problem entering the system after refreshing, please turn on the computer and press F2 to enter the BIOS, press F9 to restore the BIOS settings to factory settings, and then press F10 to save and exit. Different models may have certain differences.