I believe that many people are using technology products, such as computers, mobile phones, tablets, etc. With the development of science and technology, the functions of these technological products are becoming more and more powerful. Due to the development of the economy and the improvement of people's living standards, these technological products have become popular in every household and even in the hands of everyone. Not only can tablets allow you to enjoy high-definition images, etc., they can also be carried around in your bag. However, tablets, like mobile phones, can also have various problems. Let me take you through the Samsung 5100 flashing tutorial.

　1. Download and install the line brush treasure and Samsung 5100 line brush ROM package.

2. First, click to download the latest version of Xian Bhu Bao, download and install it.

　3. You can download the Samsung 5100 online flash ROM package directly from the online flash package for free.

PS:

The firmware number of the downloaded Samsung 5100 wired flash ROM package must be higher The firmware number of your phone (some phones display the baseband number/baseband version, which can be viewed in "Settings" - "About Device"/"About Phone"), otherwise system instability may occur after successful flashing. ;

If you have accidentally flashed a low firmware version, it does not matter. If there is no problem, you can use it normally. If you are unable to make calls and often shut down automatically If the problem occurs, you only need to use the online brush to flash to a higher version of the firmware number. ​

4. Connect the Samsung 5100, select the matching wired flash ROM package, and flash the phone.

　5. Plug in the USB data cable and connect it to the computer. You can select the downloaded ROM package and click "Start Flashing".

　6. A dialog box pops up asking whether to update the driver. Before flashing the machine, the driver of the corresponding brand model must be installed, otherwise the machine cannot be flashed. If you are unable to determine whether the driver has been installed, it is recommended to click "Yes" and check "Don't prompt again before exiting".

If you have already installed the driver, you can skip this step.

7. Display the driver update interface.

Novice users can follow the prompts. Please close all irrelevant application software before installing the driver to avoid conflicts. At the same time, disconnect the connected mobile phone to avoid the need to restart after installation. After completing the above steps, please check "I have completed the above steps and agree to continue", and then click "Next".

Flashing experts can click "Advanced Mode" and select the corresponding driver to update.

　8. The driver is being installed.

9. The driver installation is completed.

10. Click "Finish" to analyze the ROM package and connect to the mobile phone.

11. After the ROM package analysis is completed, please follow the prompts on the real interface (the picture below is a demonstration picture) or the operation steps below to enter the flash mode manually

a. Disconnect the data cable and turn off the phone, wait for about 30 seconds.

b. Press and hold Volume-, HOME in sequence key (if there is one), and hold the power button until the phone enters a warning interface and release it.

　c. Press Volume + to enter flash mode. < /p>

　d. Connect the phone.

　12. Flashing will start automatically after entering the flashing mode.

p>

13. Display the flashing success interface

Okay, the above is the detailed tutorial for flashing Samsung 5100. If you have a Samsung 5100 and need to flash it but don't know how to flash it, you can refer to the above method to flash it. Read the above steps several times to get familiar with it before flashing. This will ensure the success of flashing. Everyone should pay attention to the preparations before flashing, such as backing up some important files inside. . During the entire process of flashing, we must remain calm and patient.