It is not impossible to apply the film on iPad 2 by yourself, but you need to be patient and careful when applying it, otherwise bubble problems will definitely occur. Moreover, the screen of iPad2 looks very comfortable, but after long use or poor usage habits, the screen will look oily, dirty and full of fingerprints, which will greatly reduce the service life of the screen of iPad2.

But when we choose a screen film, we also have a lot of things to pay attention to. There are two kinds of films on the market now. One is the glue-coated film, which is stuck on with glue. However, this kind of film will damage the screen. When a problem occurs, the glue will remain on the screen when the film is replaced and it will be difficult to remove. Another kind of film is electrostatic film, which is adsorbed on the screen by static electricity and can not only protect the screen. Not easy to fall off. But there is one disadvantage, that is, it is easy to get air bubbles if it is not attached properly. So when we choose a screen film, we choose this kind of electrostatic adsorption film.

How to apply the film yourself

1. Clean the dust, oil stains, etc. on your hands first. Needless to say, how can I keep the iPad 2 screen clean when my hands are greasy?

2. Use a glasses cloth or camera lens cloth dipped in a small amount of water to wipe the surface of the iPad 2 to clean away fingerprints and dust on the surface. wait. In this step, it doesn’t matter if you don’t have a glasses cloth or a camera lens cloth. We can find a lint-free soft cloth instead. If the screen is really dirty, you can use some non-corrosive cleaning fluid to clean it. Do not use alcohol and other highly corrosive liquids to clean the iPad2 screen. After cleaning, wait for it to dry completely.

3. Tear off the protective film and lift it up starting from the side where the Home button gap is. Then align the notch with the Home button, align the top edge and the metal edges on the left and right and apply the film.

4. When applying the film, try to maintain a constant speed. If bubbles appear, please pull back less to ensure that there are no bubbles on the surface of the film. At the same time, you can use long tools, such as rulers and other long enough items, bus cards, credit cards, etc. It is recommended to use them. If they are too short, it will easily cause bubbles in some areas. Use a ruler to slowly apply the film bit by bit and press it on the surface of the iPad 2. In this case, there will be very few bubbles.

5. After pasting, repair the bubbles in some areas. useFor hard cards, credit cards, etc., wrap the credit card with the soft cloth that you just wiped the screen with, and then slowly apply force to scrape the bubbles out of the edges.

6. If there are small dust particles on the surface, please uncover the area, stick the particles up with tape, etc., and then stick the film on. This step requires us to clean the iPad2 at the beginning.

After the above steps are completed, the iPad 2 film is completed. The whole process requires the user to repeat it carefully. With some patience, it is easy to perfectly apply the film to the iPad 2.